(1) Select and determine the content of NC turning of parts;
(2) Process analysis of NC turning of drawings;
(3) Choose tools and fixtures and adjust the design to suit them.
(4) Designing processing procedures and procedures;
(5) Calculating and optimizing the machining trajectory;
(6) Writing, verifying or modifying NC turning procedures;
(7) The first piece shall be processed on a trial basis. If there are any problems or deviations, it shall be processed or adjusted.
(8) To compile technical documents of NC processing technology for reference and execution.
Add: Floor 1, Building 6, Tongfu Industrial Zone, Jiangshi Village, Gongming Town, Shenzhen 518106, China
Please fill in your mailbox information